top of page

Greenhouse and Polytunnel Shading: Why Drones Are Changing the Way Growers Protect Crops

Tim Govey
Jul 21
6 min read

Greenhouses and polytunnels are designed to create controlled growing environments, but in warm, bright conditions they can quickly become difficult to manage. Excess heat, intense sunlight and uneven light distribution can put crops under pressure, affecting growth, quality and marketable yield.


For many growers, shading and cleaning are not optional extras. They are part of managing the crop environment properly.


Greenhouse Shading with P100 Pro
Greenhouse Shading with P100 Pro

Traditionally, greenhouse and polytunnel shading has often relied on manual labour, ladders, boom lifts, specialist access equipment or tractor-mounted systems where access allows. These methods can work, but they are not always quick, simple or cost-effective. Large glasshouses, awkward tunnel layouts, narrow access routes, fragile roof structures and tight seasonal windows all make the job harder.


This is where drone application is starting to change the market.


Modern agricultural drones are now capable of applying approved greenhouse shading and cleaning products accurately, quickly and with minimal ground disruption. For commercial horticulture, nurseries, soft fruit growers and protected cropping businesses, drones offer a practical new way to manage shading and cleaning without the same level of manual access risk or site disruption.


Why shading matters

During periods of strong sunlight, protected cropping structures can trap heat quickly. This can increase plant stress, reduce crop quality and make irrigation and climate control harder to manage. Shading coatings are used to reduce excess light and heat, helping to protect the crop from heat stress and sun damage while maintaining a more manageable growing environment.


Manufacturers such as Lumiforte describe shading coatings as a way to reduce crop stress and help prevent sunburn, supporting both crop quality and yield. Some modern coatings are also designed to create more diffuse light, helping distribute light more evenly through the crop rather than allowing harsh, direct radiation to hit isolated areas.


The important point is that shading is not just about making the greenhouse cooler. It is about crop protection, crop quality and maintaining a more stable growing environment during high-light periods.


The problem with traditional application methods

The challenge for many growers is not understanding why shading is needed. The challenge is getting it applied safely, evenly and at the right time.


Traditional application can involve working at height, moving equipment around the site, coordinating labour, dealing with awkward access and accepting a level of disruption around the crop. On larger glasshouse blocks or long polytunnel runs, this can become time-consuming. On smaller or more awkward sites, it can be inefficient to bring in large access equipment for what may be a relatively simple application.


There is also the timing issue. Shading often needs to be applied before the crop is under serious stress, not after the damage has already started. When hot weather arrives quickly, growers need a method that can respond quickly.


That is where drones offer a clear advantage.



How drones have changed greenhouse and tunnel shading

Agricultural drones remove many of the access problems that have historically made shading and cleaning difficult. Instead of needing people or machinery on the roof line, the drone applies the product from the air. This allows the operator to cover roof surfaces without driving over crop areas, using ladders, walking roof structures or repeatedly moving access equipment around the site.


Lumiforte has specifically highlighted the use of drones for shading application, noting grower interest in drone application because of efficiency in application time and product use. Drone-applied shading has already been used on commercial protected crops including berries and peppers.


For UK growers, the same principle is highly relevant. Many nurseries, glasshouses and polytunnel sites have restricted access, fragile infrastructure and narrow operational windows. A drone can be deployed with a compact support setup and can work over structures that would otherwise be awkward, slow or expensive to access.


This is why drones are becoming a serious option for greenhouse and polytunnel shading. They are not just another spraying tool. They are an access solution.


The main benefits for growers

The first major benefit is reduced working-at-height risk. Greenhouse and polytunnel roofs are not ideal places for people to work. Fragile surfaces, wet coatings, uneven structures and awkward roof shapes all increase the difficulty of the job. Drone application helps keep people on the ground while the aircraft carries out the application from above.


The second benefit is speed and flexibility. A drone can move across a site without needing to reposition heavy access equipment after every section. This is particularly useful on long tunnel runs, multi-span glasshouses and sites with limited vehicle access.

The third benefit is reduced disruption. Traditional application methods can require moving equipment through working areas, blocking routes or operating close to crops and staff. Drone application can often be completed with a smaller ground footprint, helping the site continue operating with less interruption.


The fourth benefit is consistency. With the right product setup, flight planning and operator control, drones can apply shading or cleaning products in controlled passes across the roof surface. That makes them well suited to structured, repeatable work over greenhouse and polytunnel blocks.


The fifth benefit is scalability. A drone can be used for individual tunnel runs, small nurseries, large commercial glasshouse blocks or targeted sections of a site. This gives growers more flexibility than methods that only become cost-effective at a certain scale.


Cleaning is just as important as shading

Shading is normally associated with the warmer months, but cleaning is just as important for crop performance and site management. Dirty glass, algae, dust, residue and old coating material can reduce light transmission into the crop. In protected cropping, available light is one of the most valuable inputs a grower has.


Lumiforte notes that cleaning the greenhouse roof can be an underestimated energy-saving measure and states that cleaning can improve light gain, helping the greenhouse warm more effectively when that is required.


XAG P100 Pro Greenhouse Cleaning
XAG P100 Pro Greenhouse Cleaning

This creates a strong seasonal case for drone-based services. In spring and early summer, drones can help apply shading products before high-light conditions become a crop stress issue. Later in the season, drones can support cleaning operations by helping remove shading coatings or surface contamination, depending on the product used and site requirements.


For growers, this means the same drone platform can support both sides of the protected cropping calendar: applying shading when protection is needed, and supporting cleaning when light transmission needs to be restored.


Particularly useful for polytunnels

Polytunnels are a strong fit for drone application because they are often arranged in long runs, with narrow access and repetitive roof profiles. Conventional access can be awkward, and manual application can be labour-intensive. Large equipment may also be impractical, especially on sites with soft ground, tight headlands or closely spaced tunnels.


Drone application allows the operator to work from outside the tunnel rows while the aircraft applies product over the roof surface. This can make the process faster and less intrusive, especially where the grower needs multiple tunnels treated in a short weather window.


For soft fruit, salads, nursery stock and protected horticulture, that flexibility can be valuable. These crops are often high-value, sensitive to stress and dependent on maintaining a stable growing environment.


A better fit for modern horticulture

The horticulture sector is under pressure from labour shortages, rising costs, energy use, weather volatility and the need to maintain consistent crop quality. Any method that reduces labour intensity, improves access and helps complete jobs at the right time deserves serious consideration.


Drones fit that requirement well.


They can help growers respond faster to changing weather conditions, reduce reliance on manual roof access, and improve the practicality of shading and cleaning on sites that are awkward or time-consuming to manage conventionally.


That does not mean drones replace every existing method. On some sites, fixed systems, traditional spraying equipment or specialist contractors may still be appropriate. However, for many commercial growers, drones now offer a cleaner, safer and more flexible way to get shading and cleaning products onto greenhouse and polytunnel structures.


What needs to be considered before drone application

A professional drone shading or cleaning job still needs proper planning. The product must be suitable for the structure and crop system. Weather conditions must be appropriate. The operator needs to assess nearby roads, buildings, public areas, overhead cables, staff areas, livestock, watercourses and other sensitive zones.

The structure itself also matters. Glasshouses, plastic tunnels, shade structures and multi-span units can all behave differently. Roof angle, height, surface condition, access routes and drift control all affect the operation.


Before any application, Apex Agri Systems would review the site, the crop, the product, the timing and the practical access requirements. This helps make sure the job is suitable for drone application and that the work can be completed safely and effectively.


Why growers are moving toward drone-applied shading and cleaning


The reason drones are becoming the new go-to method is simple: they solve the access problem.


They allow growers to apply shading and cleaning products without the same reliance on ladders, roof access, large machinery or high levels of manual labour. They can reduce disruption, improve responsiveness and make awkward structures easier to manage.


For protected cropping businesses, the value is not just in the application itself. It is in protecting the crop environment at the right time, with less risk and less operational disruption.


As horticulture becomes more technically focused, drone application is likely to become a normal part of greenhouse and polytunnel maintenance. Shading, cleaning and crop protection are all about timing, access and consistency. Drones are well suited to all three.


Apex Agri Systems provides drone-based greenhouse and polytunnel shading and cleaning services for growers, nurseries and protected cropping sites across Wiltshire and the surrounding counties. Whether you need seasonal shading, removal support, cleaning applications or a site assessment, we can review your setup and advise whether drone application is the right approach for your business.



 
 
 

Comments


bottom of page